Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation

Audi 80/90/Coupe
+ 1.2. Car identification
- 2. Engines, carburettors
   2.1.2. Removal and engine installation (5-cylinder models)
   2.1.3. Dismantling and assemblage of engines
   2.1.4. A head of the block of cylinders, the mechanism timing
   - 2.2. An engine electric equipment
      2.2.2. A tension клинового a belt
      2.2.3. A klinovoj belt of the generator of an alternating current
      2.2.4. A regulator of pressure of the generator of an alternating current
      2.2.5. The vacuum amplifier
      2.2.6. Vacuum final valves
      2.2.7. The switches established on a steering column
      2.2.8. Check of vacuum system
   + 2.3. Carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment

2.2.6. Vacuum final valves Removal

1) on cars with the 4-cylinder engine remove the pump together with rubber linings upwards and aside from a fixing arm; on cars with the 5-cylinder engine remove the pump downwards from a fixing arm
2) remove a protective plate from below on a left-hand side of an instrument guard
3) remove an electronic socket of connection from the vacuum final valve


4) with the help "J" the-shaped tool remove the valve behind from the plug

1) establish the valve a hand
2) screw the valve in the plug as it is possible further by means of a key on 10 mm
3) pull a pedal of a brake (coupling) back as it is possible further
4) slowly release a pedal
5) the valve is adjusted now