Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
- 13. A central air
   13.2. Pressure switches
   13.3. The valve of descent of water
   13.4. A klinoobraznyj belt of the compressor of the conditioner
   13.5. Check of vacuum system
   13.6. Places of connections of lines of a coolant, a throttle
   13.7. The conditioner compressor
   13.8. Муфта the conditioner compressor
+ 14. An electric equipment




13. A central air

13.1. The conditioner
THE GENERAL DATA

System of cooling of the conditioner

And – area of low pressure
In – high pressure area
1. A throttle
Ring consolidation: internal diameter of 9.3 mm
Thickness of 1.8 mm
The inhaling moment: 10.0 Н.м.
3. The high pressure valve
4. The switch of a high pressure of a coolant
Colour of the case: yellow or green
Working pressure:
It is closed: 13.1–17.5 bar
Opens: 10.6–15.0 bar
Ring consolidation: internal diameter of 9.3 mm
Thickness of 1.8 mm
The inhaling moment: 10.0 Н.м.
5. The switch of a high pressure of the conditioner (5ти the cylinder engine)
The red case
Opens: 28.2 bar-31.0 a bar
It is closed: 10.3 bar-17.3 a bar
Ring consolidation: internal diameter of 9.3 mm
Thickness of 1.8 mm
The inhaling moment: 10.0 Н.м.
6. The serving valve of a high pressure (the 5-cylinder engine)
Concerns the switch of a high pressure of the conditioner
It is used for descent and a gymnastics of system of cooling of the conditioner
7. The condenser
Ring consolidation on an input: internal diameter of 14.0 mm
Thickness of 1.8 mm
Ring consolidation on an exit: internal diameter of 7.5 mm
Thickness of 1.8 mm
The inhaling moment on an input: 26.5 Н.м.
The inhaling moment on an exit: 16.5 Н.м.
8. The switch of a high pressure of the conditioner (the 4-cylinder engine)
9. The serving valve of a high pressure (the 4-cylinder engine)
Concerns the switch of a high pressure of the conditioner
It is used for descent and a gymnastics of system of cooling of the conditioner
10. The conditioner compressor
Ring consolidation of connection with a line of low pressure: internal diameter of 17.2 mm
Thickness of 1.8 mm
Ring consolidation of connection with a high pressure line: internal diameter of 14.0 mm
Thickness of 1.8 mm
The moment of an inhaling of connection with a line of low pressure: 42 Н.м.
The moment of an inhaling of connection with a high pressure line: 26.5 Н.м.
11. Муфта the conditioner compressor
12. The serving valve of low pressure
It is used for descent and a gymnastics of system of cooling
13. A cap
14. The store
Ring consolidation on an input: internal diameter of 17.2 mm
Thickness of 1.8 mm
On an exit: internal diameter of 17.2 mm
Thickness of 1.8 mm
The inhaling moment on an input: 42.0 Н.м.
On an exit: 42.0 Н.м.
15. The switch of low pressure of a coolant of the conditioner
Working pressure:
It is closed: 1.45–1.6 bar
Opens: 2.9–3.2 bar
Ring consolidation: internal diameter of 9.3 mm
Thickness of 1.8 mm
The inhaling moment: 5.5 Н.м.
16. The valve of low pressure
17. The evaporator
Ring consolidation on an input: internal diameter of 10.8 mm
Thickness of 1.8 mm
On an exit: internal diameter of 17.2 mm
Thickness of 1.8 mm
The inhaling moment: 16 Н.м.

The prevention

When you remove the condenser in cars equipped 5цилиндровым the engine, first of all, unscrew a coolant line, the leader from the evaporator to the condenser.


Elements of management of the conditioner

1. The hatch of giving of fresh air and
recycling air
2. The external temperature gauge
3. The vacuum amplifier
It is intended for giving of fresh air in the hatch and for recycling air
4. An air inlet of the instrument panel
5. The bilateral valve
It is intended for giving of fresh air in the hatch and for recycling air
6. The delivery fan of fresh air
7. The panel of the central air inlet and a control system
8. The switch of giving of fresh air and a mode recycling
9. The switch of the air conditioner
10. The block of management of the conditioner
11. Ropes
Connection on the management block
Connections with folding заслонками
12. Apertures for heating of feet
13. Consecutive resistance of the delivery fan

The prevention

The devices described here, are located in a compartment of the engine and supplement elements of a central air of air.

For replacement of the faulty vacuum block it is necessary to remove a heater, first of all.


The scheme of an arrangement of components

1. The external temperature gauge
Removal and installation:
Uncover the ventilating hatch and a ware box
2. The hatch of giving of fresh air
3. The temperature gauge (on a cover)
4. The vacuum block of the managing director заслонки (having blown in feet and glasses)
Vacuum hoses
5. A connecting nest
For vacuum hoses and эпектрических heater contacts
6. An aperture for blowing feet
7. The vacuum block
Ensures functioning central air заслонки (заслонки regulating air receipt in apertures for blowing of feet and glasses)

8. The adjusting engine
Regulates position заслонки the temperature control (by means of a feedback potentiometer)
Feedback potentiometer
9. The vacuum block
Ensures functioning air заслонки retsirkulirouemogo/of fresh air
10. The engine of the fan forcing fresh air
11. A heater
Together with the evaporator
12. The management block
Regulates work of the delivery fan
13. The switch of low pressure
It is intended for maintenance of functioning of system of cooling