Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
- 9. Suspension brackets, wheels
   9.1.1. Elimination of a resonance / of vibration of a cross-beam (4-cylinder models)
   9.1.2. Change of a design of a forward suspension bracket
   9.1.3. Полуось
   9.1.4. A suspension bracket rack
   9.1.5. SHRUS
   9.1.6. A suspension bracket rack (all-wheel drive models)
   9.1.7. SHRUS (all-wheel drive models)
   - 9.2. A back suspension bracket
      9.2.1. An oil cap
      9.2.2. Bearings of a nave of a wheel
      9.2.3. Removal and installation of the back bridge
      9.2.4. A suspension bracket rack
      9.2.5. Change of a design of a back suspension bracket
   + 9.3. Wheels and tyres
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment




9.2.2. Bearings of a nave of a wheel Installation

PERFORMANCE ORDER
1) establish an external holder of the internal bearing of a nave of a wheel
2) establish an external holder of the external bearing of a nave of a wheel
3) establish a rotor (for cars with ABS)
4) adjust an inhaling of bearings of a nave of a wheel: the inhaling of bearings is adjusted correctly, if the persistent washer can be moved a screw-driver (in an arrow direction) having made simple effort of a hand (thus it should not move at rotation of a screw-driver and should not be clamped so hardly that for its displacement the long lever was required)