Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
   12.2. The central section of a guard
   12.3. A cowl rope
   12.4. A forward guard
   12.5. A forward wing
   12.6. Lock pins of a cowl, the rubber shock-absorber
   12.7. A cowl
   12.8. A gazonapolnennaja rack (models the Sedan)
   12.9. A luggage carrier cover
   12.10. A back door (Compartment model)
   12.11. A forward door, the bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing stoppers, a window regulator
   12.14. The door lock
   12.15. Draught of lever transfer of the lock
   12.16. A rope of an internal door-lock
   12.17. A rotary clamp, an adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. The central lock
   12.21. The pump with two modes of forcing
   12.22. The leading activator
   12.23. The activator of a back door
   12.24. The activator of a cover of a luggage carrier
   12.25. The activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt overlay (Compartment model)
   12.28. A skeleton of a back door, the bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. A rope, шарнирный the lever
   12.31. The door handle
   12.32. The holder of components of a door
   12.33. The hatch
   12.34. A bumper casing
   12.35. Hermetic sealing of a back bumper
   12.36. An extending clamp
   12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
   12.38. The top overlay of a forward spoiler (Compartment model)
   12.39. A back spoiler / a lining of a niche of a wheel
   12.40. A back bumper (Compartment model)
   12.41. window raiser
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. A central air
+ 14. An electric equipment




12.43. Sitting
THE GENERAL DATA

The plait of wires and the block of switches represent one whole, indissoluble chain and consequently they cannot be removed separately.

Components of sitting with the electric drive (Compartment model)

1. The left power shaft
It is intended for sitting displacement
Forward and back
2. The gauge
Is responsible for sitting displacement forward and back
It is established only on driver's sitting
3. A counternut
4. A condensing rubber ring
5. A servomotor
It is intended for sitting displacement
Forward and back
6. A fixing clip
7. The right power shaft
It is intended for sitting displacement
Forward and back
8. The transferring mechanism
9. A servomotor
It is intended for adjustment of height of a forward part of sitting
10. The gauge
It is intended for adjustment of height of a forward part of sitting
It is established only on driver's sitting
11. A power shaft of the transferring mechanism
It is intended for adjustment of height of a forward part of sitting
12. The transferring mechanism
It is intended for adjustment of height of a forward part of sitting
13. A fixing bolt of the transferring mechanism
14. A socket of the block of management
For a location finding
Socket use the suitable scheme of electroconducting
15. A counternut
16. The management block
17. A plug of a socket of a plait of wires
For sitting with the electric drive equipped with a memory

18. A lock ring
19. A lining
20. The right adjusting core
It is intended for sitting displacement forward and back
21. The back terminator of movement
22. Fixing bolts of a servomotor
23. Rivets
Are intended for fastening of an arm of a spindle
24. The forward terminator of movement
25. Plugs
26. A spindle arm
Removal, grind off and take rivets
Installation, fix by means of rivets or M bolts – 5
27. A directing rail
28. The block of switches with a plait of wires
29. The right transferring mechanism
It is intended for sitting displacement forward and back
30. A frame of sitting with directing rails
31. Fixing bolts of transferring mechanisms
32. The back transferring mechanism
Adjustment of height of sitting
33. The gauge
Adjustment of height of a back part of sitting
It is established only on driver's sitting
34. Fixing bolts
Are intended for fastening of the back servomotor regulating height of sitting
35. Fastenings of the relay of giving of pressure
36. The relay of giving of pressure

Components of backs of seats with the electric drive (Compartment model)
1. A skeleton of a back of sitting
2. A fixing bolt of the lateral finishing panel of sitting
It is established in a lock pin of a back of sitting
3. A cap
Get
4. The lateral finishing panel of sitting
5. The block of switches
6. Fixing latches of the block of switches
Represents a part of the lateral finishing panel
For removal of the block of switches hook latches a screw-driver
7. A clip
Before to remove the lateral finishing panel hook a clip a screw-driver

8. The gauge
It is intended for position adjustment синки sitting
9. A socket plug
For definition of a site of a socket use the suitable scheme of electroconducting
10. A fixing bolt
11. A servomotor
It is intended for adjustment of position of a back
12. A fixing bolt
13. A lock arm
It is intended for servomotor fastening