Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
12.2. The central section of a guard
12.3. A cowl rope
12.4. A forward guard
12.5. A forward wing
12.6. Lock pins of a cowl, the rubber shock-absorber
12.7. A cowl
12.8. A gazonapolnennaja rack (models the Sedan)
12.9. A luggage carrier cover
12.10. A back door (Compartment model)
12.11. A forward door, the bottom door loop
12.12. Adjustment of a window and a bearing element of a door
12.13. Window condensing stoppers, a window regulator
12.14. The door lock
12.15. Draught of lever transfer of the lock
12.16. A rope of an internal door-lock
12.17. A rotary clamp, an adjusting spring
12.18. Adjustment of doors
12.19. A bearing element of a door
12.20. The central lock
12.21. The pump with two modes of forcing
12.22. The leading activator
12.23. The activator of a back door
12.24. The activator of a cover of a luggage carrier
12.25. The activator of a cover of a fuel tank
12.26. Door glass (Compartment model)
12.27. Adjustment of a butt overlay (Compartment model)
12.28. A skeleton of a back door, the bottom loop of a door
12.29. A bearing element of the back door, a condensing stopper
12.30. A rope, шарнирный the lever
12.31. The door handle
12.32. The holder of components of a door
12.33. The hatch
12.34. A bumper casing
12.35. Hermetic sealing of a back bumper
12.36. An extending clamp
12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
12.38. The top overlay of a forward spoiler (Compartment model)
12.39. A back spoiler / a lining of a niche of a wheel
12.40. A back bumper (Compartment model)
12.41. window raiser
12.42. Internal furnish of a body
12.43. Sitting
+ 13. A central air
+ 14. An electric equipment
|
Removal
| PERFORMANCE ORDER |
| 1) remove a bumper |
| 2) remove a radiator lattice |
|
3) remove the decorative panel |
| 4) pull out a guard from condensing rings |
|
Installation
Installation carry out upside-down:
| PERFORMANCE ORDER |
|
1) unscrew an air line of cooling air and fastening from a radiator above |
| 2) remove the central section of a guard |
|
Forward guard, removal
| PERFORMANCE ORDER |
| 1) remove a bumper |
| 2) remove a radiator lattice |
|
3) unscrew the decorative panel (arrows) |
| 4) pull out a guard from a condensing ring to the right or to the left |
|
Forward guard, Sedan
1. A bolt with шестигранной a head, 23 Н.м.
2. The self-cutting screw, 7.5 Н.м.
3. A guard, the bottom section
It is possible to remove together with the central section
4. The self-cutting screw, 7.5 Н.м.
5. A bolt with шестигранной a head, 23 Н.м. |
6. A bearing plate of the lock, it is possible to remove together with the central or bottom section
7. A metal ear, at guard removal pull it directly downwards for a corner
8. The self-cutting screw, 7.5 Н.м.
9. A guard, the central section |
Forward guard, removal for model the Sedan
| PERFORMANCE ORDER |
|
1) through an aperture for access remove the holder of a rope and disconnect a rope |
|
2) unscrew casing screws приточного air (arrow) |
|
3) to remove a guard, pull it downwards under a wing |
|
Forward guard, installation
Installation carry out upside-down.
Forward wing, removal
| PERFORMANCE ORDER |
| 1) remove a forward bumper |
| 2) remove a lining of a cavity of a wheel |
|
3) remove condensing lining (marksman) |
|
Forward wing, removal. Adjustment of a forward wing, a cowl backlash
| PERFORMANCE ORDER |
|
Unscrew fixing bolts and self-cutting screws |
|
Forward wing, installation
Installation spend upside-down. Pay attention to the following:
| PERFORMANCE ORDER |
|
1) establish a rivet for a basic arm of a cowl (the marksman |
| 2) establish a rivet for a door stopper (the marksman |
|
3) establish strips of a sealing cord, 1, 2 and a sheet lining with a bolt And on a stopper
1 = 480 mm at length and 7.0 mm in diameter
2 = 250 mm at length and 7.0 mm in diameter
|
|
The prevention The sealing cord will be necessary for compressing till the diameter in 7.0 mm
Adjustment of a forward wing, cowl backlash
| PERFORMANCE ORDER |
| 1) ослабьте all bolts of a wing |
|
2) having weakened bolts, adjust a backlash, moving a wing
And = 4.5 + 1.0 mm |
|
Forward guard in gathering for Compartment models
1. A bolt with шестигранной a head, 23 Н.м.
2. The self-cutting screw with a washer
3. A guard, the central section |
4. A guard, the bottom section
5. The self-cutting screw with a washer |
Forward guard, removal for Compartment model
| PERFORMANCE ORDER |
| 1) remove a bumper |
| 2) remove a radiator lattice |
| 3) disconnect a cowl rope |
|
4) unscrew screws of a decorative covering (arrow) and pull out it from a condensing ring |
|
5) unscrew an air line of cooling air and an arm of a radiator (arrow) |
| 6) unscrew an arm of an oil radiator |
| 7) disconnect the switch of a lantern of motor branch |
| 8) disconnect a connecting loop on the guard panel |
|
9) unscrew directing device of soaked up air (arrow) |
|
Cowl rope, detachment for model the Sedan
| PERFORMANCE ORDER |
|
|
1) through an aperture for access remove the holder of a rope and disconnect a rope |
| 2) unscrew casing screws приточного air (arrow) |
| 3) through an aperture for access disconnect the holder of a rope 1 |
| 4) disconnect a rope from an arm 2 |
|
Forward guard, installation. The central section of a guard, removal / installation for Compartment model
| PERFORMANCE ORDER |
|
To remove a guard, pull it downwards under a wing (marksman) |
|
Forward guard, installation
Installation carry out upside-down.
The central section of a guard, removal
| PERFORMANCE ORDER |
| 1) remove a bumper |
| 2) remove a radiator lattice |
| 3) disconnect a cowl rope |
|
4) unscrew screws of a decorative covering (arrow) and pull out it from a condensing ring |
|
5) unscrew an air line of cooling air and an arm of a radiator (arrow) |
| 6) unscrew and remove the central section of a guard |
|
The central section of a guard, installation
Installation carry out upside-down. |
|